close
close

How To Turn Off Sprinkler System Hunter

How To Turn Off Sprinkler System Hunter. A water droplet icon indicates a day that you want your sprinklers to run. Turn the dial to the run position to run the station (only the designated station will water, then controller will.

How To Turn On Sprinkler System After Winter from globaltorial.blogspot.com

This is the fully open position. Turn the solenoid clockwise until snug to turn off the valve. Press and hold down the minus arrow and prog buttons.

Set Up The Correct Date And Time.

Turning the solenoid will turn the valve on manually. Slowly open the main shutoff valve to let water into the sprinkler system. How to turn off sprinkler system hunter.

How To Turn Off Water To Sprinkler System.

How do you turn off a hunter sprinkler system? Turn the dial to the run position to run the station (only the designated station will water, then controller will. Your first step will be to set up the correct time and date on your sprinkler controller.

Turn The Control Dial To The Run Position.

If you have a brass or pvc ball valve, gently turn the valve handle 90 degrees to open or close it. Turn of the main water supply using one of the two steps above: Run your sprinkler system to make sure you have properly turned the head off.

Expose The Top Of The Valve And Detach The Diaphragm.

The other way is to use the bleed screw the same way, loosen the screw enough to release air (1/4 to 1/2 turn). If any of the above problems aren’t seem to be the reason behind your sprinkler system not turn on, then most probably your controller doesn’t have enough voltage. The station number will be flashing.

Press And Hold The Off Button Until The Display Stops Blinking.

How to turn off water to sprinkler system. Make sure programs a, b, c and on some controllers program d, have a run time set to 0:00 for station that you do not to operate. After a 2 second pause, the test program will begin.

Leave a Comment