How To Reset Samsung Self Clean Washer. 4e is a water supply error, meaning that washing machine has failed to fill with water in a sensible time. These are located near the back of the lid.
The following is from page 59 of the user guide: And delay end for 3 seconds until cb appears on the display. Now press the dial that signifies cycle selector, and you are all set with your samsung washing machine.
Table of Contents
(Unplug The Washer From The Wall Outlet Or Flip The Breaker In The Breaker Box For The Washing Machine).
The display will then go back to ap. Some simple solutions for you to try out are. Cleaning surface stains, the pump filter (on front load washers), and even running self clean or pure cycle.
Underneath The Panel, You Will Find A Small Hose With A Cap.
Disconnect the washer from its power source. 嵐鸞狼 regarding this, what is the self clean button on samsung washer? A power cycle can, in rare instances, resolve your issue all by itself.
Samsung Care Is Here To Help You With Your Self Clean.
Open the lid and the detergent container so that it can air dry. Hold temp until ok displays (about 7 seconds). To reset your samsung washing machine you need to simply disconnect the washing machine from power for 5 to 10 minutes.
Hold Smart Control Until Ap Displays (About 3 Seconds).
Make sure the machine is empty. If the beeps are a result of a glitch in the software, unplugging the washer can return things back to normal. • after 20 washing cycles, the self clean led reminder icon and the self clean cycle led will blink on the control panel for an hour and then turn off automatically.
These Are Located Near The Back Of The Lid.
Now press the dial that signifies cycle selector, and you are all set with your samsung washing machine. Run a rinse and spin cycle. Make sure the device is empty.