How To Change The Battery In A Honda Pilot Key Fob
How To Change The Battery In A Honda Pilot Key Fob. Press and hold the “lock” button down for one second. Remove the dead battery, taking note of.
Insert the key and turn to the “on” position. Enter your honda cabin, shut all doors securely, and have your key and fob (s) close by to be programmed. Remove the old battery and insert a new cr2032 battery in its place.
Table of Contents
Note The Position Of The Positive And Negative Sides Of The Battery In The Remote.
You can get the battery from different manufacturers such as sony, panasonic, energizer, and duracell. Then, “click” the fob cover back in place. While the fob is open, hold.
From There You Can Go Out.
Press your thumb down right above the battery to hold the fob together so the contents and external buttons don’t fall out. If you can't make it to your local honda parts center, you can always call to find out the battery size and voltage. Then follow these steps after you’ve opened.
Insert The Crossbar Between The Empty Spaces Of The Top Two Buttons, With The Crossbar’s Curvature Facing Outward.
Insert the key and turn to the “on” position. Observe which side is positive and which side is negative. Insert the battery in the same position as the old battery.
Align The Halves Of The Key Fob And Snap Back Into Place.
How to replace honda key battery. Take out the physical key (instructions above) on the side of the key fob, usually, where the physical key has come out of, there will be just a tiny slot, just big enough to fit a flathead screwdriver in or an instrument like that. Press and slide the button that releases the metal key, then slide the key out.
Separate The Two Halves Of Your Remote Using A Small Flathead Screwdriver.
Turn the key to the “on” position and hold the “lock” button on the key fob for one second. Use the key or a small flathead screwdriver to gently pry the key fob open. With the key removed you can set the key between the front and back and turn it to pop the fob open.